____________________ or lash is necessary to allow for heat expansion, oil clearance, and for proper sealing of the valve.
Fill in the blank(s) with the appropriate word(s).
compression
You might also like to view...
____________________ holes are standard machined holes that are used to accept fillister head and hex socket head screws.
Fill in the blank(s) with the appropriate word(s).
The total mechanical and electrical unit costs for a library are listed as $40 per square foot, while total project cost is estimated at $119 per square foot. Based on these values, the percentage of total costs represented by mechanical and electrical costs is closest to: (choose one)
(a) 21% (b) 29% (c) 34% (d) 38%
If you know your strengths, then you are likely to _______
A) Feel exhausted B) Work harder to cover up your weaknesses C) Try to build your weaknesses into new strengths D) Reach your career and personal potential
Technician A says that rotor thickness variation is a major cause of a pulsating brake pedal. Technician B says that at least 0.015 in. (0.4 mm) should be left on a rotor after machining to allow for wear. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician