The hole locations of the block in the accompanying figure are checked by placing the block on a surface plate and indicating the bottom of each hole using a height gage with an indicator attachment. Determine the height gage settings from the bottom of the part to the bottom of hole 3.
What will be an ideal response?
radius of hole 3 = 0.188/2 = 0.094distance to center of hole 3 = A + B - C = 0.640 + 1.008 - 0.514 = 1.134distance to bottom of hole 3 = 1.134 - 0.094 = 1.040Therefore, the main scale setting is 1.025 to 1.050 and the vernier scale setting is 15.
You might also like to view...
Provide three reasons why the thermostat should allow the coolant to quickly reach and maintain a high enough temperature.
What will be an ideal response?
Salamanders prefer to be fed earthworms
Indicate whether the statement is true or false
In conducting a replacement study of assets with different lives, can the annual worth values over the asset’s own life cycle be used in the comparison, if the study period is (a) unlimited, (b) limited, and the study period is not an even multiple of asset lives, and (c) limited wherein the period is a multiple of asset lives? Explain your answers for each part.
What will be an ideal response?
When using TTL logic, inputs are always pulled high with a(n) ____________________ as opposed to being pulled low.
Fill in the blank(s) with the appropriate word(s).