When handling an airbag what precautions should be taken?

A) Always carry an airbag pointing away from your body.
B) Place an airbag module facing upward.
C) Wear protective gloves if handling a deployed airbag.
D) All of these
E) A and B only


D) All of these

Trades & Technology

You might also like to view...

Heat-shrink insulators are intended to provide _____.

a. strain relief and mechanical protection b. suitability for cold weather duty c. rating for duty at increased voltages d. additional crimping force on the terminal

Trades & Technology

What is the value of the resistance (R) in the series circuit shown? Carry the answer to two decimal places.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Describe the construction of a capacitor

A) A can full of electronic fluid with two wires B) A layer of positively charged semiconductor followed by a layer of negatively charged semiconductor C) A layer of insulation between two layers of metal D) An anode and a cathode in an electrolyte

Trades & Technology

A compressor pump down is performed in order to change the compressor oil. With the unit operating in high speed cool:

A. Front seat the receiver tank outlet valve B. Front seat the suction service valve C. Front seat the discharge service valve D. Front seat the bypass check valve

Trades & Technology