During a traction control event, which of the following strategies is usually applied first?
A) Reduce engine torque B) Apply the drive wheel brakes
C) Either A or B depending on conditions D) Neither A nor B
A
You might also like to view...
How many analyzers are located on the cooling tower?
a. 1 b. 2 c. 3 d. 4
A typical tapered pipe reamer can usually handle pipe sizes as large as _____
a. 1" b. 2" c. 3-1/2" d. 4"
Technician A says that on some Chrysler tire pressure monitors send a signal to the remote control door lock receiver (RCDLR) regarding tire pressure. Technician B says that some GM tire sensors can learn their own positions with a transponder built into the wheel well near the tire. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
To indicate that a weld should be on the opposite side:
A. The welding symbol should be on the opposite side. B. The welding symbol should be on the side to be welded. C. The welding symbol should be on the upper side of the reference line. D. The welding symbol should be on the lower side of the reference line.