Which of the following hazards can lead to lost product? (Select all that apply.)
a. Overfilling
b. Misalignment of blanket system
c. Misalignment of pump systems
d. Pulling a vacuum on a tank while emptying
a. Correct. Overfilling can lead to lost product.
b. Correct. Misalignment of blanket system can lead to lost product.
c. Incorrect. Misalignment of pump systems does not lead to lost product.
d. Correct. Pulling a vacuum on a tank while emptying can lead to lost product.
You might also like to view...
Which of the following can cause brakes to fade or fail?
a. Not relying on the engine braking effect b. Excessive use of the service brakes c. Brakes out of adjustment d. All of the above.
The force required to operate a manual pull station must be no more than _____.
a. 5 foot-pounds b. 6 foot-pounds c. 8 foot-pounds d. 10 foot-pounds
Ice machine cleaning and sanitizing:
A) Are normally done by pouring chlorine bleach in the water sump. B) Are only necessary in areas with hard water. C) Are normally both performed using a single cleaning & sanitizing solution. D) Are separate processes requiring two different solutions.
Cargo Inspection:
a. Should be performed after every break you take while driving. b. Are needed only if hazardous materials are being hauled. c. Is most often not the responsibility of the driver.