The designation for a straight pipe thread used for a low-pressure-tight joint is:
A. NPSC
B. NPSM
C. NPAL
D. NPSF
E. NPSI
Answer: A
Trades & Technology
You might also like to view...
Type 1 roofing asphalt is ____.
A. dead level B. flat C. steep D. special steep
Trades & Technology
Electrical controls are divided into two categories: power-consuming and _________________________.
Fill in the blank(s) with the appropriate word(s).
Trades & Technology
The first step in using any height gage after cleaning the surface plate, is to check the:
A) Base for cosine error B) Vernier alignment at the top of the beam scale C) Alignment of the vernier and beam scale zero indexes D) Column for perpendicularity
Trades & Technology
For an open-root V-groove weld, the thickness of the root reinforcement should be no more than _____
a. 1/32? (0.8 mm) b. 1/16? (1.6 mm) c. 1/8? (3.2 mm) d. 3/16? (4.8 mm)
Trades & Technology