In a pure inductive circuit, ____.
a. the true power, or watts, is equal to the product of the voltage and reactance
b. the true power, or watts, is equal to the sum of the voltage and current
c. the true power, or watts, is equal to the product of the voltage and current
d. no true power or watts is produced
d. no true power or watts is produced
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. A primary cell can be recharged. 2. Batteries have two voltage ratings, one at no load and one at rated load. 3. During the charging cycle, oxygen is formed at the positive plate, and H+ ions combine with SO4 ions to form sulfuric acid. 4. The charge remaining, rate of discharge, and temperature of a battery affects the current. 5. Absorption charging means using a high charge rate and bringing batteries to 80% to 90% of full charge rather quickly.
The teeth on the starter drive gear are tapered to allow for smooth engagement with the ____________________.
Fill in the blank(s) with the appropriate word(s).
Technician Asays a full fielding test should be performed only if the charging system fails the output test. Technician B says during the full field test the field windings are constantly energized with full battery voltage. Who is correct?
A. Technician A only B. Technician B only C. Both Technician A and B D. Neither Technician A nor B
The AISC ____, a valuable reference source in preparing sectional drawings, is helpful in clarifying any ambiguities relative to proper callouts and dimensions.
A. Structural Steel Detailing B. Guide to Steel Construction C. Manual of Steel Construction D. The Steel Construction Reference