When charging a lead-acid (flooded-type) battery, ________

A) The battery temperature should not exceed 125°F (hot to the touch)
B) The initial charging rate should be about 35 amperes for 30 minutes
C) The battery may not accept a charge for several hours, yet still be a good (serviceable) battery
D) All of the above


D

Trades & Technology

You might also like to view...

After weaning, pigs are put together by similar age and size in _____ operations

A) confinement B) farrowing C) finishing D) stocker

Trades & Technology

Using Fan Law 1 (shown in the image above), find the new volume of air delivered from a blower if the existing volume is 1,750 cfm, and the blower speed is increased from 850 rpm to 1,000 rpm. (Round your answer to the nearest whole number.)

a. 1,488 cfm b. 2,059 cfm c. 2,400 cfm d. 2,750 cfm

Trades & Technology

Lack of secondary air or a stopped up vent will cause

A) Flame rollout B) Delayed ignition C) Higher than normal temperature rise D) The high limit to open

Trades & Technology

A(n) ____________________ allows the transaxle to be mounted slightly below and to the side of the engine.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology