For loading and unloading equipment, a trailer should be parked _____.
a. with the towing vehicle uphill
b. on level ground
c. with the towing vehicle downhill
d. and unhitched from the towing vehicle
b. on level ground
You might also like to view...
33°17' - 9°24'18" =
What will be an ideal response?
A technician is checking the operation of the electronic throttle control system by depressing the accelerator pedal with the ignition in the on (run) position (engine off). What is the most likely result if the system is functioning correctly?
A) No throttle movement B) The throttle will perform a self test by closing and then opening to the default position C) The throttle goes to wide open when the accelerator pedal is depressed all the way D) The throttle will open partially but not all the way
The Quartus II software has two tools that are used to estimate power consumption. The PowerPlay Power Analyzer is used ________
A) only for minimum clocking speeds B) earlier in the design process C) to get an exact power consumption value D) later in the design process
A(n) ____ box is used for surface or concealed installations.
What will be an ideal response?