When reading a load chart, when the planned load radius falls between two values on the chart, you must _____.
a. use the next lowest value
b. use the next highest value
c. interpolate
d. round the estimated radius to the nearest whole number
b. use the next highest value
You might also like to view...
The two basic types of grout are cementitious and _____.
a. shrink-fit b. mortar c. cement d. epoxy
A(n) ____________________ confines concrete to a desired shape until it hardens
Fill in the blank(s) with the appropriate word(s).
An AND gate is checked for operation and the following readings are taken on the gate: input A = 0.2 V, input B = 4.5 V, input C = 0.4 V, output = 4.9 V. What might be wrong with the gate?
A) Nothing is wrong with the gate. B) The output is too low: it should be 5 V. C) The output is stuck high; the chip is bad. D) Input C is too high.
Name a process takes metal-alloyed powders and feeds them into a die where they are compacted under pressure to form the desired shape
What will be an ideal response?