The peak gain on the closed loop Bode response for a second order lag system should be between 8 and 10 db
Indicate whether the statement is true or false
FALSE
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. A PLC system offers many advantages over a relay-based control system except that it can be difficult to implement. 2. Volatile memory will lose its programmed contents if operating power is removed or lost. 3. In industrial applications where the PLC will replace the relay logic circuit, the operator controls and process switches will generally remain as they are wired. 4. Manual motor starters are used extensively on industrial machines. 5. In thermal protected overload relays, the thermal element is connected mechanically to a normally open contact.
The auxiliary drain pan should be:
A) 1 inch larger than the primary drain dimensions. B) Located inside the unit under the primary drain. C) Piped into the same drain line as the primary drain. D) Larger than the overall unit dimensions.
On electrical drawings, a solid line with a solid circle at the end indicates wiring _____
a. turned up b. turned down c. concealed in a ceiling or wall d. concealed in a floor
In some steam tables, the enthalpy of evaporation is referred to as _____
a. sensible heat value b. saturated heat value c. total heat value d. latent heat value