When using a sensitive drill press, you can tell if the feed is approximately right in soft steel, if the:
A) Chips come out long and stringy B) Chip is a tightly rolled helix
C) Chips come out blue or violet in color D) Chip is in short segments
B
You might also like to view...
In order to solve for an unknown side of a right triangle, at least an acute angle and ____________________ must be known.
Fill in the blank(s) with the appropriate word(s).
A Navistar MaxxForce 15 engine has a total displacement of 15.2 liters. Convert this into cubic inches:
A. 921 cubic inches B. 928 cubic inches C. 934 cubic inches D. 1,052 cubic inches
The pipe axis position can vary by ±5 degrees from the nominal 45-degree angle in the _____
a. 1G position b. 2G position c. 5G position d. 6G position
Centering tabs and spacers are used to center the seal during installation and then removed after the seal
assembly is secured in place on _____ seals. a. tandem b. metal bellows c. cartridge d. balanced