What happens if standard fuses and circuit breakers are used in the overload protection?
A) The overload protection will function normally.
B) Nuisance trips will occur when the compressor starts.
C) The overload protection will not meet code.
D) Nuisance trips will occur when the compressor stops.
B
You might also like to view...
Liquid ethanol is a flammable fluid and can release vapors that form explosive mixtures at temperatures above its flash point at 16.6°C. In a chemical plant, liquid ethanol (cp = 2.44 kJ/kg•K,?? = 789 kg/ m3) is being transported in a pipe with an inside diameter of 5 cm. The pipe is located in a hot area with the presence of an ignition source, where an estimated 20 kW of heat is added to the ethanol. Your task as an engineer is to design a pumping system to transport the ethanol safely and to prevent fire hazard. If the inlet temperature of the ethanol is 10°C, determine the volume flow rate that is necessary to keep the temperature of the ethanol in the pipe below its flash point.
Powdered connecting rods can be marked with ________
A) A permanent ink marker B) A punch C) A steel number stamp D) Any of these
An OBD-I Ford is able to provide engine serial data if there are terminals in which cavities of the DLC?
A) 1 and 2 B) 2 and 6 C) 1 and 3 D) 2 and 4
A vehicle will pull to the side with the most positive camber
Indicate whether the statement is true or false