Determine the Leq that can be used to represent the inductive network of Fig. 6.79 at the terminals.
 FIGURE 1.png)
 FIGURE 4.png)
 ANSWER.png)
You might also like to view...
The terms wallboard, plasterboard, and sheetrock are commonly used for gypsum board. Which of these is a proprietary term?
What will be an ideal response?
The type of plastic pipe that is primarily connected with clamps is _____.
a. ABS b. PE c. PVC d. CPVC
The Orowan mechnaism, which explains the hardening effect of precipitate particles when the participates have grown to a size where they are no longer coherent with the matrix, is shown in Fig. 16.17. The strengthening arises from the fact that the disloactions must bow out between two neighboring precipitate particles. This bowing out is opposed by the line of tension of the dislocations. Ashby has deduced an equation giving the stress needed to dislocations under conditions conforming to the Orowan model. An equation giving this stress, which assumes that the particles are spherical and that the system involves iron containing carbon, may be found in Leslie, W.C., The Physical Metallurgy of Steels, McGraw Hill Book Company, New York, 1980, p.198. It is:
A given circuit using an RC integrator to turn on after 20 seconds now takes now takes much longer to turn on. What is the most probable cause?
A) The capacitor has decreased in value. B) The capacitor has increased in value. C) The resistor has opened. D) The resistor has decreased in value.