In a speed density system, what does NOT need to be corrected for?

A) BARO sensor data B) Air temperature
C) Amount of EGR D) Oxygen in exhaust from the oxygen sensor


D

Trades & Technology

You might also like to view...

If you want to divide the sum of 3 and 12.5 by 2 in a spreadsheet cell you would enter:

A. =(3+12.5)/2 B. =3+12.5/2 C. =3+(12.5/2) D. Both a and b are correct

Trades & Technology

Why should an acetylene cylinder always be used in the upright position?

A. Acetylene will not ignite B. Liquid acetone will drain through hoses C. Acetylene sits in the top half of the tank D. Pressure gauges will not read properly

Trades & Technology

Tom, the owner of Burger Palace, determined that his weighted average cost of capital is 8%. He ex­pects a return of 4% per year on all of his invest­ments. A proposal presented by the owner of the Dairy Choice next door seems quite risky to Tom, but it is an intriguing partnership opportunity. Tom has determined that the proposal’s “risk factor” will require an additional 3% per year return for him to accept it.

(a) Use the recommended approach to determine the MARR that Tom should use and explain how the 3% risk factor is compensated for in this MARR. (b) Determine the effective MARR for his busi­ness if Tom turns down the proposal.

Trades & Technology

What effect does the daily range have on heat gain?

A) Areas with a high daily range experience higher temperatures, so the cooling HTMs are higher. B) Areas with a high daily range generally do not require any cooling. C) Areas with a high daily range generally require equipment with more latent cooling capacity. D) Areas with a high daily range can take advantage of natural cooling that occurs at night, so the cooling HTMs can be a little smaller.

Trades & Technology