A diagnostic trouble code (DTC) has been set for a fault with the lateral acceleration sensor or circuit. What test could be performed to check if the sensor is working?
A) Drive the vehicle in a circle to see if the scan tool reads 0.0 G
B) Unplug it and see if the scan tool reads 1.0 G
C) Disconnect the sensor and hold it sideways to see if the scan tool reads 0.0 G
D) Disconnect the sensor and hold it sideways to see if the scan tool reads 1.0 G
D
You might also like to view...
What hardware device on a truck chassis enables a connection between an EST and the chassis data bus?
A. 7-wire trailer connector B. J1939 data connector C. USB port D. communications adapter
The ____________________ of a rule receives more wear than the rest of the rule.
Fill in the blank(s) with the appropriate word(s).
Placing the negative on the electrode instead of the base metal is referred to as ____.
A. AC B. DCEN C. DCEP D. reverse polarity
Technician A says the heated oxygen sensor monitor performs two distinct tests; one test verifies the performance of the pre- and post-oxygen sensor heater element and circuit. Technician B says the heated oxygen sensor monitor performs two distinct tests; one test monitors the pre- and post-oxygen sensor signal switch rate and signal circuit. Who is correct?
A. A only B. B only C. both A and B D. neither A nor B