When the motor is initially started in the following figure, the winding in the inside branch of the parallel circuit is __________.
A. functional
B. eliminated
Answer: A
You might also like to view...
If the G-code is T2 M06:
A. Tool 2 will be selected B. Tool 2 will be selected and the coolant will be turned on C. Tool 6 will be selected D. Tool 6 will be selected and the coolant will be turned on
The speed-up terminals on a defrost control board are used to _____.
a. initiate a defrost cycle for testing b. shorten the time interval between defrost cycles c. increase the speed of the system compressor d. increase the speed of the indoor blower
Technician A says when there is a delay or slip as the transmission shifts into any forward gear, a slipping rear clutch is indicated. Technician B says a slipping front or forward clutch is indicated if the shift for all forward gears is delayed. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
A conventional oxygen sensor has a reading of 900 mV on a multimeter. This indicates ________
A) A vacuum leak B) A lean exhaust C) A rich exhaust D) None of these