What term refers to a ratio of the amount a member will deflect in proportion to the applied load?
A. horizontal shear
B. vertical shear
C. compression
D. modulus of elasticity
Answer: D
You might also like to view...
An 8-bit PWM DAC with period TPWM = 10ms has sub-interval duration T?=_______ (xx.x) ?s.
Fill in the blank(s) with the appropriate word(s).
What does cutability mean?
What will be an ideal response?
If the turning radius (toe out on turns, or TOOT) is out of specification, what part or component is defective?
A) The strut is bent. B) The control arm is bent. C) The steering arm is bent. D) The spindle is bent.
When a refrigerant enters the compressor, it is a ____ and when it leaves the compressor, it is a ____.
A. low pressure low temperature superheated vapor, high pressure high temperature superheated vapor B. low pressure low temperature superheated vapor, low pressure low temperature subcooled vapor C. high pressure superheated vapor, low pressure superheated vapor D. low pressure low temperature subcooled liquid, high pressure high temperature superheated vapor