If the head is installed on the engine and you want to rotate the camshaft to a different position during belt installation, you should move the pistons partway down in their bores (about ____ degrees) in order for the valves to clear the pistons.
A. 25
B. 45
C. 90
D. 180
Answer: B
Trades & Technology
You might also like to view...
The use of large underwater “wind” turbines is a form of _______________
Fill in the blank(s) with the appropriate word(s).
Trades & Technology
The LIN bus voltage reads normal with the slave module disconnected, but then reads 0 volt when it is reconnected. What can be the cause?
A. The slave module has an internal short to ground. B. The circuit between the master and slave modules is open. C. The circuit between the master and the slave module is shorted to ground. D. The master module is faulty.
Trades & Technology
What types of lines can be used for shading?
What will be an ideal response?
Trades & Technology
The shoulder of a leader should begin anywhere within the note
Indicate whether the statement is true or false.
Trades & Technology