Describe how to operate the compressor system.
What will be an ideal response?
A. Ensure the area is clear of debris and all auxiliary systems are lined up and operational.
B. Set PIC 100 to 50 psig and raise in 25 psi increments until desired operational conditions are achieved
C. Drain D-100 and close bleeder valve.
D. Open V-100, V-101, V-103, V-105, V-107.
E. Set back pressure regulator PCV-110 to 20 psig.
F. Turn on Compressor 100 and closely monitor all process variables.
G. Ensure PCV-100 is operating properly and place PIC-100 into AUTO.
H. Complete check-list of compressor system.
I. Cross-check process variables with SPEC sheet.
You might also like to view...
The minimum power required to drive the pump is nearest:
The problems in this mini-exam pertain to the simple Rankine cycle shown. The various variations to this cycle depend
primarily on the temperature and pressure leaving the boiler and the pressure leaving the turbine. The mass flow rate is
20 kg/s.
A) 160 kW
B) 180 kW
C) 200 kW
D) 220 kW
Convert 9.850° into degrees and minutes. Do not round
What will be an ideal response?
Why are dual-range temperature sensor circuits used?
What will be an ideal response?
Normal alkaline soils often exhibit deficiencies of available iron and manganese
Indicate whether the statement is true or false