What information would you expect to find in an engineering drawing?
A. Fabrication details for every structural member in a job
B. Details of miscellaneous metal connectors required
C. Locations of major structural components such as columns, beams, and girders
D. Bills of material listing every item that will be used during fabrication of the products and erection of the final structure
Answer: C
You might also like to view...
Pumping the brake pedal Up and Down unnecessarily can result in
Air brake
The standard unit of measure for most lumber is the board foot
Indicate whether the statement is true or false
Which of the following has to be true based on this process description?
A fresh feed stream contains 50.0mol/s each of A and B and no other compounds. It is mixed with a recycle stream and enters a reactor. The reaction A + B ? C is carried out in the reactor. The reaction reaches equilibrium and 50% of the entering A is converted into C. The reactor effluent is sent to a distillation column. The bottom product from the column is 98.0 mol% pure C and is the product from the process. The top product contains 1.0 mol% C and the entire top product is recycled. The entire process operates at steady state. A. The recycle stream is 49.5 mol% A and 49.5 mol% B. B. The equilibrium constant in the reaction is 1. C. The molar flow rate of the product stream is 50.0 mol/s. D. All of the above have to be true. E. None of the above has to be true, though they could be true.
Fill in the blank(s) with the appropriate word(s).