List at least six conditions, that may exist when the problem occurs, that will be of help in diagnosing a transmission problem.
What will be an ideal response?
1. Hot or cold operating temperatures
2. Cold or hot outside temperatures
3. Loaded or unloaded vehicle
4. City or highway driving
5. Type of terrain
6. Upshifting or downshifting
7. Particular gear ranges
8. Coasting or braking
9. Transmission maintenance
You might also like to view...
Posttensioning of concrete slabs is used to _____.
a. reduce the amount of reinforcing steel needed b. shorten the curing time of the concrete c. allow the use of lower-strength concrete d. reduce cracking under heavy load
The steering shaft torque sensor uses ________ as inputs to the EPS control module
A) Viscous resistances B) Vacuum pulses C) Calibrated springs D) Voltage signals
To reduce cracking during welding:
A) Fill craters when ending weld B) Use low-hydrogen electrodes C) Use slower travel to maintain oval bead D) All of the above
Consider an attempt to lift a row of books on a shelf by pressing against each end and lifting. If enough pressure is exerted inward from both ends, there is sufficient compression to lift all of the books at once. The principle applied to the book shelf is the same as that applied to which category of precast concrete?
A. Reinforced concrete products B. Tension concrete products C. Prestressed concrete products D. Rebar-strengthened concrete products