How is a dimension of 22 feet 6 inches shown on a shop fabrication drawing?
What will be an ideal response?
22'–6
You might also like to view...
Soil taxonomy is based on properties of the soil as they can be observed in the field or laboratory
Does it include a hierarchical grouping to show how the levels relate?
Indicate by YES (Y) or NO (N).A nonmetal plate (k = 0.05 W/m•K) and an ASME SA-240 stainless steel plate (k = 15 W/m•K) are bolted together by ASTM B21 naval brass bolts. Both plates have a thickness of 38 mm, and the brass bolts are bolted through both plates. The bottom steel plate surface (surface 1) is subjected to a uniform heat flux of 200 W/m2. The top nonmetal plate surface (surface 2) is exposed to convection at an air temperature of 20°C and a convection heat transfer coefficient of 5 W/m2•K. Also, thermal radiation exchange occurs between the upper plate surface and the surrounding surface temperature of 30°C. The emissivity of the plate surface and the bolts is 0.3. The ASME Boiler and Pressure Vessel Code (ASME BPVC.IV-2015, HF-300) limits the maximum use temperature to 260°C for the SA-240 steel
plate. The ASME Code for Process Piping (ASME B31.3-2014) limits the maximum use temperature of B21 bolts to 149°C. Determine whether both ASME codes are being complied with under these conditions
What will be an ideal response?
What is the electrolyte used in a NiMH battery?
A) Sulferic acid B) Gear acid C) Potassium hydroxide D) Sodium H2O
The grade of fuel oil most commonly used in residential oil-fired furnaces is:
A) Number 5. B) Number 1. C) Number 6. D) Number 2.