Which type of duct system typically has the air handler located below the conditioned space and the ductwork running around the perimeter of the space?
A. plenum-type duct system
B. extended-type duct system
C. reducing-extended-plenum duct system
D. perimeter duct system
Answer: D
You might also like to view...
What happens in a two-stroke engine at the same time the piston is moving up on the compression stroke?
What will be an ideal response?
Coolers use what are called ____________________, where a liquid refrigerant is evaporated in low pressure, the cooled gas is absorbed into a second liquid, and then the second liquid/absorbed refrigerant is reheated to evaporate the refrigerant and send it back to the cycle.
Fill in the blank(s) with the appropriate word(s).
An example of stored energy in equipment or machinery is ___________________.
A. capacitor B. spinning wheel C. elevated weight D. a,b, and c
The humidity sensor is used to adjust what components?
A) The cooling coil face and air-mixing dampers B) The heating coil face and bypass dampers C) The cooling coil face and bypass dampers D) The heating coil face and air-mixing dampers