Briefly describe the ISO standard, ISO 22301:2011, and note the main difference in focus between this standard and ISO 27031:2011.
What will be an ideal response?
ISO 22301:2011 is the ISO standard that specifies what must be done to implement a BC management system (BCMS) that can be certified as complying with the requirements of the standard. It is meant to apply to organizations of all sizes and types, including government agencies and private enterprises. The standard emphasizes meeting business needs, having capacity and resilience to manage events that may occur, how the BCMS can be measured as to performance and effectiveness, and how to ensure ongoing improvement to the BCMS.
Whereas the 27031 standard focuses on the IT aspects of BCM, the 22301 standard focuses more on organizational aspects.
You might also like to view...
Which of the following is NOT considered a nondestructive form of testing?
A) Deaerator digester B) Magnetic particle C) Liquid penetration D) Radiography
In the article “Measurements of the Thermal Conductivity and Thermal Diffusivity of Polymer Melts with the Short-Hot-Wire Method”, the thermal diffusivity of a liquid measured by the transient short-hot-wire method is given by
where? is the thermal diffusivity; V and I are the voltage and current applied to the hot wire, respectively; l is the length of the wire; and A and a are quantities involving temperature whose values are estimated separately. In this article, the relative uncertainties of these quantities are given as follows: V, 0.01%; I, 0.01%; l, 1%; A, 0.1%; a, 1%.
a. Find the relative uncertainty in ?.
b. Which would reduce the relative uncertainty more: reducing the relative uncertainty in l to 0.5% or reducing the relative uncertainties in V, I, and A each to 0?
This is a sheet metal feature that creates a curved sheet metal feature in a linear application on flat material or around an axis.
What will be an ideal response?
When setting the ignition timing on a coil-on-plug ignition system, the technician must first ________
A) Loosen the crankshaft position sensor bolts B) Loosen the distributor lock plate C) Disconnect the SPOUT connector (Ford vehicles) D) None of these; the timing cannot be adjusted