Arc strikes outside of the weld groove ____.
A. will crack as the pipe expands and contracts with heat
B. form hardness spots which strengthen the weld
C. should be made as often as possible
D. increase pipe durability by increasing the pipe flexibility around the weld area
Answer: A
You might also like to view...
When rigging a load, the center of gravity must be placed _____.
a. directly above the hook b. directly below the hook c. between the hook and the nearest outrigger d. between the hook and the load destination
Most automatic transmissions achieve ____ with planetary gears and a lock-up torque converter.
A. wide radio transmission B. gear ratio C. overdrive D. countergear
The two major manufacturers of nozzles in the United States are Delavan and Spraying
What will be an ideal response?
Throttle-body fuel-injection systems use what type of injector driver?
A) Pulse-width modulated B) Pulsed C) Saturated switch D) Peak and hold