Define the following terms:
a. Baghouse
b. Dike
c. Flare system
d. Incinerator
e. Landfill
a. A baghouse is air pollution control equipment that contains fabric or bag filter tubes, envelopes, or cartridges designed to capture, separate, or filter particulate matter.
b. A dike is a wall (earthen, shell, or concrete) built around a piece of equipment to contain any liquids should the equipment rupture or leak.
c. A flare system is a device used to burn unwanted process gases before they are released into the atmosphere.
d. An incinerator is a device that uses high temperatures to destroy solid, liquid, or gaseous wastes.
e. A landfill is a human-made or natural pit, typically lined with an impermeable, flexible substance (for example, rubber) or clay and is used to store residential or industrial waste materials.
You might also like to view...
Air flows into and out of a room, as shown, with the pressure and temperature at 100 kPa and 18ºC at all positions. If the volume flow rate V3 = 20 m3/min, the mass flux m1 = 0.2 kg/s, the the velocity V2 is nearest:
A) 8.1 m/s
B) 5.8 m/s
C) 3.4 m/s
D) 2.5 m/s
General clauses that have a significant impact on the cost of the work are often found in the "back end" of specifications in the review process.
Answer the following statement true (T) or false (F)
PROBLEM 2.47 The assembly shown consists of an aluminum shell (Ea = 70 GPa, ?a = 23.6 ? 10–6/?C) fully bonded to a steel core (Es = 200 GPa, ?s = 11.7 ? 10–6/?C) and the assembly is unstressed at a temperature of 20?C. Considering only axial deformations, determine the stress in the aluminum when the temperature reaches 180?C.
What should be used to clean a dirty commutator in a disassembled starter motor?
A. general purpose emery cloth B. right-angle grinder C. sandpaper with #100 grit or less D. sandpaper with #400 grit