The top surface of an insert should be positioned below the concrete panel surface by _____
a. 1/16"
b. 1/8"
c. 1/4"
d. 3/8"
b
You might also like to view...
Technician A says a torque converter clutch plate has a spring-cushioned damper assembly in the center of the disc, and friction material on the outside of the plate. Technician B says the torque converter clutch plate is splined to the turbine shaft, and the plate locks the turbine to the converter when the piston is applied. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
The ____ line is used to show important overhead construction.
A. phantom B. hidden C. extension D. center
Technician A says that a vehicle may have stored DTCs even if the MIL is not illuminated. Technician B says that all DTCs will illuminate the MIL. Which technician is correct?
A) Technician A B) Technician B C) Both technicians D) Neither technician
The pressure regulator on a fuel tank _____.
a. prevents gas from backing up into the tank b. relieves excess internal pressure to keep the tank from exploding c. allows the operator to increase the working pressure in order to work faster d. reduces the high pressure in the cylinder to the lower working pressures required for cutting or welding