A solenoid must be produced that has a magnetic flux density of 25 Wb/m2 . The coil for the solenoid has 200 loops in a distance of 2 cm, and the maximum current for the wire is 1A. Select a suitable material for this solenoid from the materials listed that you expect to be cost effective.
(a) Calculate the magnetic field created by a coil made of copper wire that
has 200 turns in 5 cm and carries a current of 5 A.
(b) What is the magnitude of the flux density or inductance created by this coil in a vacuum?
mild steel is suitable with a relative permeability of 2000, and it is cost
effective.
You might also like to view...
The average density of each planet in the solar system is determined by taking its mass and dividing that by its
A) radius. B) diameter. C) surface area. D) radius squared. E) volume.
If the intensity of sound changes (increases) by a factor of 100, the decibel level changes by a factor of
A) log 100. B) 100. C) 20. D) 1. E) 10.
One mole of an ideal gas is held at a constant pressure of 1 atm. Find the change in volume (in liters) if the temperature changes by 50°C.
A. 1 B. 2 C. 3 D. 4 E. 5
You throw a baseball straight up. Compare the sign of the work done by gravity while the ball goes up with the sign of the work done by gravity while it goes down
A) The work is positive on the way up and positive on the way down. B) The work is positive on the way up and negative on the way down. C) The work is negative on the way up and positive on the way down. D) The work is negative on the way up and on the way down because gravity is always downward.