In the process of qualifying and certifying the WPS, if the test samples do not pass the applicable test, ____.
A. the WPS is discarded and a new one is written
B. the WPS parameter values are changed as feasible, and the samples rewelded
C. make sure the samples were welded by a welder certified for the process
D. the test samples are submitted in any event
Answer: B
You might also like to view...
What is the average length of daylight for a week that has sunlight lengths of 9 hr. 56 min., 9 hr. 57 min., 9 hr. 59 min., 10 hr., 10 hr. 1 min., 10 hr. 2 min., and 10 hr. 3 min.??
Fill in the blank(s) with the appropriate word(s).
The term full scale means a drawing is
a. one-half the size of the object shown b. one-third the size of the object shown c. three-fourths the size of the object shown d. the same size as the actual object
What is the total system charge for a system with a factory charge of 56 oz of R-410A, an assumed length of 15 ft, and a 3/8 in liquid line that is 35 ft long?
A) 56 oz + 12 oz = 68 oz B) 56 oz + 21 oz = 77 oz C) (35 - 15 ) × 0.6 = 12 oz D) 56 oz
Use Data 12 sheet in text book.Mixed number Example: 2-1/3Put a dash between the whole number and the fraction.Simple Fraction Example: 2/3
Constant = 1.414e-e = c-c - (Total fit allowance)Round answer to the nearest 1/16 of an inch.The answer is in inches!If the pipe is 3" NO-Hub C.I.A = 5' 3"B = 14' 2"C = 10'Find e-e for "B."
Fill in the blank(s) with the appropriate word(s).