When boosting the battery of a refrigeration unit what is the last battery connection to be made?
A. Positive jumper cable to the positive (+) post of the stalled battery.
B. Connect one end of the negative jumper cable to the negative (-) post of the jumper battery.
C. Connect one end of the negative jumper cable to a good chassis ground connection on the stalled unit away from the stalled battery.
D. Connect the positive end of the jumper cable to the positive (+) of the jump starting battery.
Answer: C
You might also like to view...
Technician Asays the red brake-warning lamp is an indication of an antilock- or stability-control-related system failure. Technician B says the red-brake warning lamp is usually an indication of a base brake system failure, such as low brake fluid. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
The fluid circulated through the water coil of a geothermal heat pump system:
A) Is typically connected to the local water utility system. B) Comes from condensation water collected off the evaporator. C) Is circulated through a heat transfer loop buried in the ground. D) Is circulated through a cooling tower.
How does a power burner differ from an atmospheric burner?
A) An atmospheric burner has a fan used to force air into combustion. B) A power burner uses air forced into the combustion area by a fan. C) Atmospheric burners are rarely used today. D) Power burners are primarily for residential use.
Exhibitors and their animals will be pulled out of the lineup by the judge for _____.
Fill in the blank(s) with the appropriate word(s).