Technician A says that a 6 point socket is more likely than a 12 point socket to round off a fastener head. Technician B says that a 12 point socket is more likely than a 6 point socket to round off a fastener head. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
B
You might also like to view...
Technician A says the hot-wire MAF sensor sends a varying voltage signal back to the PCM. Technician B says that contamination of the hot-wire MAF sensor can cause drivability problems. Who is correct?
A. Technician A B. Technician B C. Both A and B D. Neither A nor B
In the ____ position, it is necessary to continuously change the weld pattern, electrode angle, and weld speed.
A. 6G 45 degree fixed inclined B. 2G vertical fixed C. 5G horizontal fixed D. 1G horizontal rolled
In a typical 280-pound market hog, the four primal cuts will make up about __________ percent of the animal's live weight.
Fill in the blank(s) with the appropriate word(s).
Air in the brake hydraulic system can cause all of these EXCEPT ________
A) Spongy brake pedal B) May require the driver to "pump up" the brakes before they will stop the vehicle C) Lower than normal brake pedal D) Hard brake pedal