Discuss eddy currents as they relate to tank circuits.
What will be an ideal response?
All-metal detectors operate at radio frequencies, and the balance of the tank circuit is used to keep the oscillator running. If the tank circuit becomes unbalanced, the oscillator stops operating. When a nonferrous metal, such as aluminum, copper, or brass, is placed near the sensor coil, eddy currents are induced into the surface of the metal. The induction of eddy currents into the metal causes the tank circuit to become unbalanced and the oscillator to stop operating. When the oscillator stops operating, some other part of the circuit signals an output to turn on or off.
You might also like to view...
Which of these systems uses a small amount of central air to induce the flow of room air?
A) Fan coils. B) PTAC. C) Dual duct VAV. D) Chilled beam. E) Fan terminal units.
Discuss the care needed for potted Easter lilies
What will be an ideal response?
If 12 V and -19 V sources are connected so their total voltage is -7 V, they are ________
A) in parallel B) series opposing C) connected dangerously D) series aiding
In general, two types of tables are used to organize data; these are the organizational table and the ____ table.
A. scatter B. qualitative C. regression D. look-up