What is the purpose of a gauge manifold valve?

A) To control refrigerant flow to the gauge's center
B) To cut off refrigerant flow from the center of the gauge
C) To allow for a permanent opening for refrigerant flow
D) To limit the flow of refrigerant to the outside of the valve


A

Trades & Technology

You might also like to view...

What are three important advantages of profile tolerances in comparison to coordinate tolerances?

What will be an ideal response?

Trades & Technology

All of the following statements are true EXCEPT:

A. if an engine failed due to an overheating problem, it is possible that the sensors for coolant temperature and the fan relay could be defective. B. sometimes a piston will seize in the cylinder due to an air leak in the intake manifold or a fuel system problem, resulting in too lean an air-fuel mixture. C. any fuel and cooling system hoses that are not in excellent condition must be replaced. D. if a problem is one that is not the responsibility of the rebuilder, under the terms of the warranty the rebuilder is still liable for the cost of the repair.

Trades & Technology

Some products, such as chicken, are dip frozen in the first stage of the freezing process. Why?

What will be an ideal response?

Trades & Technology

Group G is the catchall group whose atmospheres contain combustible dusts not included in Group E or F, including ____.

A. flour, grain, wood, plastic, and chemicals B. metal and polymer C. paper and paint D. chemicals, metal and rubber products

Trades & Technology