The two rack and pinion steering gear adjustments include ________
A) Pinion bearing preload and rack support
B) Worm bearing preload and tolerance adjustment
C) Stub shaft endplay and sector shaft preload
D) Sector shaft and stub shaft preload
A
You might also like to view...
?When would a portable fan be needed?
A. ?Anytime you are welding outside of a welding shop. B. ?When the shop ventilation is not enough to blow away the welding fumes. C. ?When you are welding around others to blow away the extra heat. D. ?When you are making a GTA weld on thick stainless steel piping.
Joystick steering could use these TWO different ways to control the main steering control valve:
a. Mechanical linkage and pilot oil b. Position sensors and poppet valves c. Mechanical linkage and poppet valves d. Poppet valves and rotary valve
Given the following readings from an electric furnace, use the formula to calculate airflow. CFM =
What is the airflow in CFM?Voltage at strips 240 V Amp draw of strips 22.6 A Return-air temperature 65°F Supply-air temperature 120°F A) The airflow is 264 CFM. B) The airflow is 312 CFM. C) The airflow is 363 CFM. D) The airflow is 336 CFM.
Where should the vapor barrier be placed when insulating walls in a cold climate?
A) About halfway between the inner and outer walls B) Toward the inside of insulated wall C) Toward the outer wall D) Outer walls should not use a vapor barrier.