Technician A says when installing the Teflon rings on the control valve in a rack and pinion steering gear, the rings may be heated with a propane torch. Technician B says when installing the Teflon rings on the control valve in a rack and pinion steering gear, an expansion tool may be used. Who is correct?
A. A only
B. B only
C. Both A and B
D. Neither A nor B
Answer: B
You might also like to view...
The ____________________ is the most commonly used linear unit of measure for engineering drawings in the United States.
Fill in the blank(s) with the appropriate word(s).
Which of the following can cause compressor damage due to lack of lubrication?
A) Mixing different oils B) Low refrigerant charge C) Low oil charge D) All of the above
When two or more wired partitions are electrically connected together, the cord must be terminated at an attachment plug-and-cord connector equipped with a _____.
a. strain relief device b. stress relief device c. site-isolating device d. positive locking device
A square wave voltage varies between 0 V and 12 V. The positive pulses are 50 ?s wide and there is a 50 ?s gap between them. What is the DC average of the waveform?
A. 3 V B. 4 V C. 6 V D. 9 V