Give another name for the revision history block and identify its typical location on a print, and indicate how the revision history block is displayed when the content exceeds the available space.
What will be an ideal response?
The Revision History block, also called the revision block, is used to record changes to the drawing and is located in the upper right corner of sheet borderlines, though some companies use other placement. You must reserve room in the right portion of the sheet, below the revision block, to add drawing revision information when necessary. When the revision content exceeds the space available, add a supplemental Revision History block to the left of the original revision block.
You might also like to view...
For loading and unloading equipment, a trailer should be parked _____.
a. with the towing vehicle uphill b. on level ground c. with the towing vehicle downhill d. and unhitched from the towing vehicle
Which of the following causes galvanic corrosion between frame members?
A. Unevenly distributed loads B. Dissimilar metals in direct contact C. Over-torquing suspension brackets D. Lack of lubricant on suspension fasteners
All change orders must be _____
A) within the intent of the contract B) logged daily C) initiated by the project manager D) updated weekly
Technician A says the back side of the rail must always be reinforced with another layer of metal whenever a butt joint is used to secure a rail section. Technician B says a 110 to 115 V welder is adequate for performing all the required welds when replacing frame sections. Who is correct?
A. Technician A only B. Technician B only C. Both Technicians A and B D. Neither Technician A nor B