What is the proper instrument for measuring runout?
A) Vernier caliper B) Dial indicator
C) Inside micrometer D) Outside micrometer
B
You might also like to view...
The __________________________ assembly contains a pair of high voltage contactors that close to direct power from the DC bus to the dynamic retarding grid circuits.
Fill in the blank(s) with the appropriate word(s).
Technician A says that wet asbestos is known as hazardous waste. Technician B says that dry asbestos is known as solid waste. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
How many volts are required if the power is 25 watts and the resistance is 64 ohms?
Fill in the blank(s) with the appropriate word(s).
Waveform was captured in closed loop at 2000 rpm from the HO2S 1/2 sensor on the composite vehicle. Tech A says that the waveform could be result of unintentional ground in the purge flow control circuit (terminal 37 of the ECM). Tech B says that clogged PCV valve may be generating this pattern. Who's right?
 figure 1.png)