One slug is equal to
a. 32.2 lbm
b. 1 lbm
c. 1/32.2 lbm
d. None of the above
Answer: a
You might also like to view...
Which of the following describes the role of fuel that enters the timing chamber in a CELECT Plus injector?
A. keeps the metering checkball seated B. hydraulic link between timing and metering plungers C. keeps the spill passage sealed D. loads the nozzle valve closed until the control solenoid is energized
Describe the significance of the Industrial Revolution?
What will be an ideal response?
A dc shunt motor drives a centrifugal pump at a speed of l000 rpm when the terminal voltage and line currents are 200 V and 50 A, respectively. The armature and field resistances are 0.1 ? and 100 ?, respectively.
a. Design a starting resistance for a maximum starting current of 120 A in the armature circuit. b. What resistance should be added to the armature circuit to reduce the speed to 800 rpm? c. If the terminal voltage is reduced by 25%, what is the speed of the motor?
Why should ultraviolet germicidal lamps NOT be handled with bare hands?
A) The residual UV in the lamp coating can cause severe burns. B) The coating on the outside of the lamp is toxic. C) The oil from your fingerprints can lead to premature failure of the lamp. D) The exterior UV coating will wipe off, reducing the UV output.