The formula for a RC time constant is: Time = Resistance x ____.
A. Current
B. Voltage
C. Pin number
D. Capacitance
Answer: D
You might also like to view...
An advantage of a "series flow" configuration of ground loops is ____.
A. smaller diameter pipes B. ease of removing trapped air C. lower installation costs D. less antifreeze is required
The backing plate should be replaced if the shoe contact areas (pads or ledges) are worn more than ________
A) 1/8 in. (4 mm) B) 1/2 in. (13 mm) C) 1/16 in. (2 mm) D) 1/4 in. (7 mm)
When removing a high pressure line on a GDI engine, what should the technician do?
A) Replace the line with a new part B) Torque the fasteners to double the normal amount to insure a proper seal C) Reinstall the part in the exact location where it was originally D) Use sealant on the threads when reinstalling the part
Draw the alphabet of lines and label each line
What will be an ideal response?