Splicing aluminum wire is being discussed. Technician A says to solder the wires by coating them with petroleum jelly to control the temperature of the soldering iron. Technician B says to cover the splice with electrical tape. Who is correct?
A. Technician A only
B. Technician B only
C. Both Technician A and B
D. Neither Technician A nor B
Answer: D
You might also like to view...
A _______ DTC is a code representing a fault that has occurred but not enough times to illuminate the MIL.
Fill in the blank(s) with the appropriate word(s).
What symptom describes yellowing even though the plant has received adequate light?
a. etiolation c. drowning necrosis b. chlorosis d. fading
The purpose of a line relief or port relief valve is to:
a. allow some oil to escape from a line going to an actuator b.limit the load sense pressure going to the pump control c. increase the pressure in a circuit over main relief pressure d. relieve pressure spikes in a circuit when the directional control valve is in neutral
How are object lines drawn?
A. dark and thin B. light and thin C. dark and medium D. dark and thick