A “consensus indicator” logic circuit is shown in Figure P13.32. Write the logical expression for the output of this circuit in terms of its input. Also create a truth table for the output in terms of the inputs.
Analysis:
The truth table can be obtained from the circuit considering the steps D, E, and F, as shown in the figure.
You might also like to view...
The underlying sketch shows a typical connection between a mullion and rail in a stick-built curtain wall. Using a leader line and label, identify: (i) shear block and (ii) bottom cover of rail. Explain how the bottom cover is attached to the top part of the rail.
What will be an ideal response?
Why would insulation be required on storm drain piping?
a. To prevent condensation on the piping b. To ensure that every pipe in a piping system is insulated c. To protect the piping from inclement weather d. To prevent corrosion of the piping
When you have two equal resistors, how does the current split between them?
A. Equally B. Balanced C. Parallel D. Across the series connection
What is the basis of the energy balance method? How does it differ from the formal finite difference method? For a specified nodal network, will these two methods result in the same or a different set of equations?
What will be an ideal response?