If batts are to be used in a 2 × 4 wall, the insulation will be indicated as ____ inches thick-the width of a 2 × 4.

A. 2 1/2
B. 3
C. 3 1/2
D. 4


Answer: C

Trades & Technology

You might also like to view...

Which of these locksets requires a key on both sides of the door?

a. Double-cylinder deadbolt b. Security c. Tubular d. Mortise

Trades & Technology

Whip-poor-wills are largely _____, and they get their name from their distinctive call which is commonly heard at dusk and during the night

a. social b. gregarious c. nocturnal d. migratory

Trades & Technology

What would you suspect first, if standard medium temperature reach-in with a fixed metering device had the following conditions:

? a condensing temperature 20° above ambient, LOW ? 21° subcooling, HIGH ? evaporator temperature 50° below box temperature, LOW ? and 25° superheat? HIGH (Starving) a. dirty condenser b. dirty or iced evaporator c. low on charge d. restricted cap tube

Trades & Technology

Technician A says that spot welds are removed using a hole punch. Technician B says that an air chisel is the best tool for removing factory spot welds. Who is correct?

A. Technician A only B. Technician B only C. Both Technicians A and B D. Neither Technician A nor B

Trades & Technology