Refer to Figure P2.64 and determine the equivalent resistance between terminals a and b if terminal c is wired (shorted) to terminal a and terminal d is wired (shorted) to terminal b.
What will be an ideal response?
Known quantities:
Schematic of the circuit shown in Figure P2.64.
Find:
The equivalent resistance seen by terminals a and b.
Analysis:
Shorting a to c eliminates the 360? resistor. Shorting b to d eliminates the rightmost 540? resistor. This leaves the remaining two resistors in parallel with each other.
540?||180?=R_eq
R_eq=135?
You might also like to view...
A(n) ____ indicates the exact point of reference.
A. identifier B. icon C. leader D. design point
Technician A says alternator drive belt tension should be as tight as possible to prevent the belt from slipping. Technician B says that a high parasitic load could cause discharged batteries. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
The perimeter of a large multistory high rise building consists of
A) the interior areas B) the areas around the outside of the building C) the main floors D) the most important areas
A port number is used by the layer 4 protocol to designate which device is sending the packet
Indicate whether the statement is true or false