A dual-diaphragm vacuum booster allows engineers to design a ________ brake booster
A) Less expensive B) Smaller diameter C) Lighter weight D) Shorter
B
You might also like to view...
When fabricating pre-assembled mats, the perimeter joints should be tied at 100 percent, and the interior intersections at _____.
a. 20 percent b. 25 to 50 percent c. 75 to 80 percent d. 100 percent
What is a relay?
What will be an ideal response?
When testing circular runout, the tolerance is applied independently at any cross section as the part is rotated ____.
A. at high speed B. 360° C. at low speed D. 180°
Answer the following statement(s) true (T) or false (F)
1. Multiple Class 2 or Class 3 power supplies can be wired in parallel with each other. 2. Coaxial cable connecting a video camera to a monitor is an example of integral wiring. 3. Class 1 circuits typically operate from greater voltage and current levels than those of Class 2 or 3 circuits. 4. Class 1 circuits, that are not functionally associated, must be separated from power conductors by a solid and firmly fixed barrier. 5. Insulation requirements for Class 1 conductors 18 and 16 AWG must be suitable for 600 V.