on the cone clutch limited slip, the rear are splined into (A) the cone clutch differential side gears or (B) the spring block. which is correct
A. a only
B. b only
C. both a and b
D. neither A nor B
A. a only
You might also like to view...
During a certain machining operation, 12 cubic inches of material are removed. This amount expressed in terms of cubic centimeter (cm.) is:
A) 163.8 cm. B) 16.38 cm. C) 196.38 cm. D) 1966 cm.
Name and discuss in some detail three process/ machine considerations when injection molding a whisker-reinforced part. Think about the fiber length, the small clearances between the nozzle and part, flow through the part, type of resin (i.e. thermoplastic vs. thermoset), Screw speed, etc are some of the considerations that could be discussed somewhere in their answer. Define symmetry and balance
as they relate to composite lay-ups, and give examples of having one but not both qualities. What will happen to the part if both are not met? What will be an ideal response?
Insulating gloves must be inspected by the user _____.
a. before each use b. weekly c. monthly d. yearly
You are required to be evaluated by a physician to ensure that you are physically fit to use which of the following types of protective equipment?
a. Chemical goggles b. Filter mask c. Respirator d. Chemical apron