Before towing a tandem-drive axle truck, hooked from the front, which of the following should be done to avoid damage to the transmission?
A. ensure that the drive wheels remain on the ground and the transmission is in neutral
B. disconnect the axle shafts on one side of the truck
C. remove all four drive axle shafts and cover the ends of the hubs
D. never tow a tandem drive truck from the front
Answer: C
You might also like to view...
To crab a wheeled crane to the left, direct _____.
a. the front wheels to the left and the rear wheels to the right b. front and back wheels to the left c. the front wheels to the right and the rear wheels to the left d. the front and back wheels in the opposite direction of the turn
Plant stems contain these two structures:
What will be an ideal response?
A transfer case is difficult to shift (range shift). Technician A says that the shift linkage or shift fork may be worn or damaged. Technician B says that the blocking ring may be worn or damaged. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
The inducer in a condensing furnace runs, but the burners will not light. One possible cause is _____
a. an undersized inducer b. an open 24V transformer c. an oversized chimney d. snow blocking the air intake