Describe the practice for representing a sheet metal part with only the flat pattern, and using rectangular coordinate dimensioning without dimension lines.

What will be an ideal response?


A common method for representing a sheet metal part is only the flat pattern, and using rectangular coordinate dimensioning without dimension lines. The flat pattern dimensions take into consideration material bending so the final bent part is exactly as designed. For example, a flat pattern drawing of a sheet metal part dimensioned using rectangular coordinate dimensioning without dimension lines. In this example, leader lines and specific notes dimension circular features. The drawings also show centerlines for bend lines with text or arrow indicating the bend direction.

Trades & Technology

You might also like to view...

The removal of a shrub branch at the crown or point of origin is termed ____________________

Fill in the blank(s) with correct word

Trades & Technology

All of the following were true of England as the 17th century opened up EXCEPT

A. a large population boom. B. enclosing crop lands, thus forcing small farmers off the land. C. increasing unemployment. D. economic depression hit, displacing thousands of farmers. E. desolate cities with a decreasing population.

Trades & Technology

Why check the trunk of a used vehicle?

A) To check the general condition of the trunk B) To see if there is a spare tire C) To check that the jack and jack handle are included D) All of the above

Trades & Technology

If the gain of a proportional controller is 4, the equivalent proportional band value is ____________________.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology