Which of the following types of wire repair is best?
A. Wrapping damaged insulation with tape.
B. Using a solderless crimp connector.
C. Using a tap connector.
D. Soldering and shrink wrap.
Answer: D
You might also like to view...
Modules on the serial bus that can initiate communication with other modules on the serial data bus are called slaves.
Answer the following statement true (T) or false (F)
The fuel pressure regulator in a returnless fuel system is located:
A. At the outlet of the fuel rail B. At the inlet of the fuel rail C. On the frame of the vehicle D. At the fuel pump sender assembly
Calculate the ultimate BOD of the mixed river and sewerage stream.
The Ganges River, shown in Figure 4.66, has an annual average flow rate of 12,105 m3/s. The average temperature of the Ganges River was reported to be 24.6ºC. The Ganges has become contaminated with raw sewerage and industrial waste so that the dissolved oxygen in the river upstream of sewerage discharges is 4.6 mg/L. Suppose that the raw sewerage that is untreated flows into the Ganges at a rate of 460 m3/s, the temperature is 25ºC, and the dissolved oxygen in the sewerage stream is completely depleted (i.e. DO = 0). How would you develop a plan for improving water quality in the Ganges River? What will be an ideal response?
Explain what a Type A misfire is and how the PCM reacts to it.
What will be an ideal response?