Reducing the CFM through the evaporator will cause the head pressure to ____________________.

Fill in the blank(s) with the appropriate word(s).


decrease

Trades & Technology

You might also like to view...

Government agencies that provide regulatory requirements applicable to the construction industry include OSHA, EPA, and _____.

a. BLS b. FCC c. DOT d. FAA

Trades & Technology

The building section associated with the floor plan in Figure P2.4 is shown in Figure P2.8. Assume a live load of 60 lb/ft 2 on all three floors. Calculate the axial forces produced by the live load in column C2 in the third and first stories. Consider any live load reduction if permitted by the ASCE standard.

Trades & Technology

The minimum bending radius for a coaxial cable is recommended to be no less than ____________________ times the cable diameter.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Why would a 35°F medium-temperature case need to defrost?

A) It is common for water to freeze at 35° in higher elevations. B) The coil temperature for a 35°F box operates below freezing. C) A 35°F temperature case does not need to defrost. D) The store manager might decide to maintain a lower box temperature.

Trades & Technology